Vehicle Sensor Control is an application that shows the instantaneous values of various sensors and data in your vehicle.
In order to use the application, you must have ELM327 with bluetooth connection. Connect the ELM327 to the OBD2 port of your vehicle and pair your phone with the ELM327. The pairing password will usually be "1234" or "0000". Open the application and click the bluetooth icon at the top right. Select the ELM327 device that you have paired from the pop-up screen. (The engine of your vehicle must be operated so that the application can be connected with the ELM327 device.) On the upper left of the application screen, the device will write the connection status. If the application connects to the ELM327 device, you will be able to view the sensor data in your vehicle.
Note: Not all sensor data may be displayed in the application. This is because your car does not support certain sensor data.
车辆传感器控制是一种应用程序,可显示车辆中各种传感器和数据的瞬时值。
要使用该应用程序,您必须具有蓝牙连接的ELM327。将ELM327连接到车辆的OBD2端口,并将手机与ELM327配对。配对密码通常为“1234”或“0000”。打开应用程序,然后单击右上角的蓝牙图标。从弹出屏幕中选择已配对的ELM327设备。 (必须操作车辆的引擎,以便应用程序可以与ELM327设备连接。)在应用程序屏幕的左上角,设备将写入连接状态。如果应用程序连接到ELM327设备,您将能够查看车辆中的传感器数据。
注意:并非所有传感器数据都可能显示在应用程序中。这是因为您的汽车不支持某些传感器数据。